More info
The Tropic Marin® Original Balling Liquid Set is made up of three solutions A, B and C, according to the well-known Balling method, and can be applied immediately, manually or using a metering pump.
The 3 part method adds calcium chloride dihydrate (part A) and sodium carbonate/bicarbonate (part B), while the addition of sodium chloride free sea salt (part C) maintains the crucial ionic balance in the aquarium water. This balanced dosage of calcium creates the best conditions for the good growth of corals and coralline algae and prevents the inevitable descent of important elements seen in two-part methods.
Benefits:
- The set consists of three solutions A, B and C according to the well-known Balling method.
- Only in this way will the supply of the ions associated with sodium and chloride be completely balanced, thus obtaining the balance of ions in the water.
- Simple and immediate use: same dosage for all three solutions - manually or using a dosing pump.
- It can be used within the framework of the Tropic Marin® Bio-Actif System.
- Suitable for an aquarium with soft corals, LPS and SPS.
Ingredients:
The Tropic Marin® Original Balling Liquid Set containing:
Part A: Calcium Chloride Dihydrate (20,000 mg/l Ca)
Part B: Sodium carbonate/bicarbonate (2 800 °dH/l)
Part C: Sodium Chloride Free Sea Salt (~3350 mg/l Mg; ~980 mg/l K)
Application and Dosage:
Add the same amount of each of the three solutions separately to the aquarium water each day (DO NOT MIX).
The addition of 50 ml of each component per 100 liters of aquarium water increases the calcium content by 10 mg/l and the alkalinity by 1.4 °dH.
Maximum dose: 150 ml of each solution per 100 l of aquarium water per day.
For stock replacement, Tropic Marin® offers several replacement packages:
Original Balling Refill Set
Original Balling Components